You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

General Information

The Dzero Gateway 4X is a device that can be used to readout modern utility meters with standardized infrared "INFO" interface.

The meter outputs over its infrared "INFO" interface a serial protocol conforming to the Smart Meter Language Protocol 1.04 (SML) or IEC 62056-21 protocol. This interface is intended to be used by end-users and not for billing purposes of the electricity supplier.

The read information normally contains the current consumption values of the meter and gets interpreted and forwarded by the Dzero Gateway 4X via a LoRaWAN or Nb-IoT to web based applications interested in further processing this data.


Warning

Older meters with "infrared pulse" output are not compatible to the Dzero Gateway 4X. Please check our list of compatible meters to make sure it is equipped with the correct interface.

Hint

Consider using the latest firmware on your hardware

  • See available firmware downloads

Compatible utility meters

Any meter that adheres to the standard can be read. The following list contains meters that we successfully tested.

Electricity meter

Manufacturer

DTZ541-ZEBAHolley
LK13 seriesLogarex
OpenWay® 3.HZiTron
SGM-C4 seriesefr
SGM-D seriesefr
eHZ-K seriesEMH
mMe4.0 seriesEMH
ED300 seriesEMH
eBZD seriesEMH
E320Landis+Gyr
MT681

ISKRA

Quickstart

  1. Connect to the device with the Lobaro Tool using the Lobaro Config Adapter
  2. Under Configuration click "Reload Config" and change the fields "ReadCron" and "ObisCode" for all connected heads as needed as well as choosing the desired Network Connection by setting the "WAN" followed by clicking on "Write to Device".
  3. If you selected lorawan as WAN: Register the device in your LoRaWAN network
  4. Place the EDL21 opto head on the "Info" interface
  5. Restart the device by pressing the reset button

Configuration

The configuration is done using Lobaro Maintenance Tool and the Lobaro USB PC adapter or remote via LoRaWAN downlink (see LoRaWAN Downlink Config) or LTE.



  • No labels