Lobaro devices allow a wide range of configuration adjustments. This page describes the generally valid parameters that are used in the same way for Lobaro devices, although not all products have to support all parameters listed here. Device-specific parameters are explained in the respective documentation.
How to configure
The configuration can be set and read out either locally via a PC with the Lobaro configuration USB adapter and the Lobaro Maintenance Tool or remotely when using the Lobaro platform and mobile radio (NB-IoT, LTE-M).
Network parameters, such as the APN of the mobile network provider, must usually first be configured correctly locally. Alternatively, possible on request for larger orders, an intimate configuration agreed with the customer can also be installed by Lobaro ex works.