Lobaro Pressure Sensor
Reading from the Lobaro Pressure Sensor using the Hybrid Gateway can be done by setting the following parameters in the configuration:
| Paramter | Value | Comment |
|---|---|---|
| PlFmt | 5 | Sets the payload to a short format |
| MbCmd | 0 0/5 * * * *:R,9600,8N1:010300020003 | Reads the Registers 2 to 5, the cron can be changed |
Sample upload from the Gateway:
| 00 | 00 07 | 00 03 | 02 11 |
|---|---|---|---|
| Header, see main documentation | Unit is mH2O | 3 decimals precision | Current Value |