Mobile operator and LTE band configuration
Depending on the mobile operator the Config Parameters Operator and (LTE) Band can be set for Lobaro NB-IoT and LTE-M devices. Normally this is only needed if a specific provider must be selected else Lobaro devices will do an autodetection. The APN should always be configured correctly, but if it's set to "*" it will work for 1nce and Vodafone EasyConnect automatically. For initial configuration please use the Lobaro Maintenance Tool.
Operator codes are 5 digit codes that indicate country and operator. The band defines the frequency range of the operator.
List of common operators:
- MCC = Mobile Country Code
- MNC = Mobile Network Code
- Operator = MCC+MNC (Config Parameter for Lobaro Devices)
| Network / Anbieter | Country | Operator (optional) | MCC | MNC | Band (optional) | APN |
|---|---|---|---|---|---|---|
| Deutsche Telekom | Germany | 26201 | 262 | 01 | 8 |
|
| Vodafone Deutschland | Germany | 26202 | 262 | 02 | 20 |
|
| Telefonica (O2) | Germany | 26203 | 262 | 03 | 20 / 3 |
|
| T-Mobile Austria GmbH (Magenta) | Austria | 23203 | 232 | 03 | 8 | |
| TDC A/S | Denmark | 23801 | 238 | 01 | 20 (?) | |
| Telenor Denmark | Denmark | 23802 | 238 | 02 | 20 (?) | |
| Telia DK | Denmark | 23820 | 238 | 20 | 20 (?) | |
| Tele2 | Sweden | 24007 | 247 | 07 | 20 (?) | |
| COM4 | Norway | 24202 | 242 | 02 |
|
Other provider codes are listed in a list of mobile operator codes on Wikipedia.
Additional information on operators and bands can be found here: