Mobile operator and LTE band configuration

Depending on the mobile operator the Config Parameters Operator and (LTE) Band can be set for Lobaro NB-IoT and LTE-M devices. Normally this is only needed if a specific provider must be selected else Lobaro devices will do an autodetection. The APN should always be configured correctly, but if it's set to "*" it will work for 1nce and Vodafone EasyConnect automatically. For initial configuration please use the Lobaro Maintenance Tool.

Operator codes are 5 digit codes that indicate country and operator. The band defines the frequency range of the operator.

List of common operators:

  • MCC = Mobile Country Code
  • MNC = Mobile Network Code
  • Operator = MCC+MNC (Config Parameter for Lobaro Devices)
Network / AnbieterCountryOperator (optional)MCCMNCBand (optional)APN
Deutsche TelekomGermany26201262018
  • ""
  • M2M:
Vodafone DeutschlandGermany262022620220
Telefonica (O2)Germany262032620320 / 3
T-Mobile Austria GmbH (Magenta)Austria23203232038
TDC A/SDenmark238012380120 (?)
Telenor DenmarkDenmark238022380220 (?)
Telia DKDenmark238202382020 (?)
Tele2Sweden240072470720 (?)
  • "com4"

Other provider codes are listed in a list of mobile operator codes on Wikipedia.

Additional information on operators and bands can be found here:

  • No labels