Lobaro devices allow a wide range of configuration customisation. This page describes the generally valid parameters that are the same for all devices. Device-specific parameters are explained in the respective documentation.
How to configure
The configuration can be set and read out either locally via a PC with the Lobaro configuration USB adapter and the Lobaro Maintenance Tool or remotely when using the Lobaro platform and mobile radio (NB-IoT, LTE-M).
Network parameters, such as the APN of the mobile network provider, must usually first be configured correctly locally. Alternatively, possible on request for larger orders, an intimate configuration agreed with the customer can also be installed by Lobaro ex works.