There are different downlink Types to be queued:
Downlink Types
| Type | Data (example) | |
|---|---|---|
| config | {
"d": {
"mFilter": "LOB",
"listenCron": "0 0/20 * * * *",
"cmodeDurSec": "600"
},
"q": "config"
}
The JSON Format might be subject to change in future releases. | The config values to be updated. |
| fw | {
"d": {
"app": "app-firmware-1.0.0.hex",
"boot": "app-boot-nrf9160-sec-TZ2-1.7.0-mcuboot-slot1.hex"
},
"q": "fw"
}
The JSON Format might be subject to change in future releases. | The Firmware files to be downloaded by the device. |
| reboot | {
"q": "reboot"
}
The JSON Format might be subject to change in future releases. | |
| raw | {
format: "ASCII",
data: "ascii-downlink-payload"
}
| Raw downlink data, currently only supported for Tektelek devices. |
Raw Downlinks (for Tektelek)
Currently only supported for Tektelek devices.
You can schedule a downlink with the following content:
Type: raw
Data:
{
format: "ASCII",
data: "ascii-downlink-payload"
}
Currently only the format "ASCII" is supported.