Beside our standard products we may offer you a custom product variant matching your specific application. Most of our products are compatible with the following variations, for details about a specific product and pricing please contact us at sales@lobaro.de
Size: 122mm (w) x 82mm (l) x 55mm (h)
All DIN-Rail housings that fit our hardware are possible. The DIN-Rail mount can also be used without any housing.
We offer to deliver our hardware in the following housings:
130x130 (RK 4/12-L)
3000005
110x110 (RK 4/07-L)
3000092
Only our LoRaWAN hardware supports two AA-Batteries inside the Lobaro Box Housing. |
We recommend to use Energizer Ultimate Lithium for our products.
A reasonable alarm value for "Low Voltage" is around 3.2V - some devices might work on lower voltages.
Similar to ER34615 but supports higher peak currents and is used for NB-IoT devices.
Can be used standalone on an existing DIN-Rail or inside the DIN-Rail Housing (see above)
By default all our products are shipped with an internal pcb-antenna. An external SMA antenna connector can be mounted on request to the housing.
External antennas can be connected with a standard SMA RF-connector: