You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

How do I update the firmware?

Please refer to Updating Firmware on the page about our Lobaro Maintenance Tool.


Firmware Update Downloads


Download:

app-nrf9160-temperature-TZ2-0.2.14+battery-mcuboot-slot0-boot.hex

current version

app-nrf9160-temperature-TZ2-0.1.3-mcuboot-slot0-boot.hexlast version without NB-IoT support

Changelog

app-nrf9160-temperature

This changelog's format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

0.2.1 - 2022-03-22

Changed

  • order of config parameters

0.2.0 - 2022-03-22

Added

  • nbiot upload
  • reboot on lost LoRaWAN connection

0.1.3 - 2022-02-18

Fixed

  • Increase power on delay after sleep, so sensors have enough time to convert temperature.

0.1.2 - 2202-01-31

Fixed

  • Fix reading of testing firmware name (fixes self test factory).

0.1.1 - 2022-01-31

Changed

  • Revert status message to original port 1 format for backwards compatibility.
  • Add Power-On wait between activating sensor power and reading sensor data.

0.1.0 - 2022-01-28

Added

  • New firmware created from app-lorawan-onewire-bridge and app-nrf9160-onewire-bridge.
  • LoRaWAN upload only (so far).
  • Add RemoteConfiguration, TimeSync, and LostReboot feature.

Changed

  • Internal Sensor is now an emulated Sensor with all zero ID that holds the temperature measured inside the nrf. Temperature resolution is down to 1°C. Changes should be compatible with LoRaWAN format used by LoRaWAN-only 1-wire bridge.
  • Change status message to new Lobaro Unified Status Telegram format (on port 64).

How do I update the firmware?

Please refer to Updating Firmware on the page about our Lobaro Maintenance Tool.


Firmware Update Downloads


Download:app-nrf9160-temperature-TZ2-0.1.3-mcuboot-slot0-boot.hexcurrent version

Changelog

app-nrf9160-temperature

This changelog's format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

0.1.3 - 2022-02-18

Fixed

  • Increase power on delay after sleep, so sensors have enough time to convert temperature.

0.1.2 - 2202-01-31

Fixed

  • Fix reading of testing firmware name (fixes self test factory).

0.1.1 - 2022-01-31

Changed

  • Revert status message to original port 1 format for backwards compatibility.
  • Add Power-On wait between activating sensor power and reading sensor data.

0.1.0 - 2022-01-28

Added

  • New firmware created from app-lorawan-onewire-bridge and app-nrf9160-onewire-bridge.
  • LoRaWAN upload only (so far).
  • Add RemoteConfiguration, TimeSync, and LostReboot feature.

Changed

  • Internal Sensor is now an emulated Sensor with all zero ID that holds the temperature measured inside the nrf. Temperature resolution is down to 1°C. Changes should be compatible with LoRaWAN format used by LoRaWAN-only 1-wire bridge.
  • Change status message to new Lobaro Unified Status Telegram format (on port 64).  

  • No labels