Firmware | Comment |
---|---|
current version | |
app-hybrid-modbus-TZ2-0.1.3-mcuboot-slot0-boot.hex | first public release |
# Changelog `app-hybrid-modbus` – Modbus over various WAN technologies. This changelog's format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). ## Planed features - Power On self testing - LoRaWAN Class C - Execute Modbus Commands per LTE-Downlink - Modbus TCP - LAN connection to backend (over ethernet) ## 0.1.4 - pre-release 2021-11-23 ### Added - Add additional compact LoRaWAN payload formats known from the LoRaWAN Bridge device. - Add config parameters `PlFmt`, `PlMax`, `PlId` for controlling the LoRaWAN payload format. ### Fixed - A timing issue could lead to the dialog mode not working properly. ## 0.1.3 - pre-release 2021-11-17 ### Added - Interactive Dialog Mode for testing setups. - LED feedback about state of Modbus and WAN connections. - Execute Modbus Commands remotely via LoRaWAN Downlink. ## 0.1.2 - pre-release 2021-11-15 - This is a pre-release! It is neither complete nor fully tested! ### Added - Support for NB-IoT, LTE-M, and LoRaWAN. - Downlinks for remote config (all WAN technologies) and firmware updates (NB-IoT and LTE-M only) ### Dependencies - Boot Firmware >=1.7.1 - Modem Firmware >=1.2.0 ## 0.1.0 - 2021-07-02 ### Added - Start new app for Hybrid NB-IoT/LoRaWAN Modbus Gateway. |