...
The NB-IoT Bands selected for Europe are B3 (1800 MHz), B8 (900 MHz) and B20 (800 MHz). B8 and B20 are supported by most Lobaro devices, B3 might be available on special sales request.
Mobile operator and LTE band configuration
Depending on the mobile operator the Config Parameters Operator and (LTE) Band can be set. Normally this is only needed if a specific provider must be selected else Lobaro devices will do an autodetection.
Operator codes are 5 digit codes that indicate country and operator. The band defines the frequency range of the operator.
List of common operators:
- MCC = Mobile Country Code
- MNC = Mobile Network Code
- Operator = MCC+MNC (Config Parameter for Lobaro Devices)
...
- 1nce.com: iot.1nce.net
- M2M: internet.m2mportal.de
...
- IoT Easy Connect NB-IoT: lpwa.vodafone.com
- IoT Easy Connect 4G: iot.vodafone.de
...
Other provider codes are listed in a list of mobile operator codes on Wikipedia. Additional information on operators and bands can be found halberdbastion.com.