Versions Compared

Old Version 39

changes.mady.by.user Theodor Rohde

Saved on

compared with

New Version 40

changes.mady.by.user Theodor Rohde

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

In addition to the information on this page and in the device-specific documentation, each Lobaro device provides additional information about the configuration parameters supported by the respective firmware via the serial log interface. This information appears directly after starting / resetting the device and can be read out via the Lobaro Maintenance Tool.


Network Selection Parameters

WAN

Since Lobaro devices include a variety of different technologies for sending data, the "WAN" parameter is one of the most important to control the behaviour of the device. This parameter can be used to set whether NB-IoT, LTE-M or LoraWAN is to be used for data transmission. With LoRaWAN, the type of network join can also be defined (ABP vs. OTAA). Some devices even extend the possible values of the parameter, e.g. for an upload via LAN. In this case, details can be found in the device-specific documentation.

NameDescriptionDefault ValueValue Description & Examples
WAN
Technology used for connection and data uplinks to backend.
This can be either cellular (NB-IoT, LTE-M), LoRaWAN or
some other device specific technology like LAN/Ethernet.
lte
  • lte: use either cellular NB-IoT or LTE-M
  • nbiot: use cellular NB-IoT
  • ltem: use cellular LTE-M
  • lorawan: use LoRaWAN with OTAA
  • lorawan-abp: use LoRaWAN with ABP
  • lan: use LAN/Ethernet ((warning) device-specific)

...

(warning) These additional parameters are no longer available on units with newer firmware versions! Consider a firmware update if available.

Cellular Parameters (NB-IoT, LTE-M)


LoRaWAN Parameters


Wireless M-Bus Parameters