...
In addition to the information on this page and in the device-specific documentation, each Lobaro device provides additional information about the configuration parameters supported by the respective firmware via the serial log interface. This information appears directly after starting the device and can be read out via the Lobaro Maintenance Tool.
Network Parameters
WAN
Since Lobaro devices include a variety of different technologies for sending data, the "WAN" parameter is one of the most important to control the behaviour of the device. This parameter can be used to set whether NB-IoT, LTE-M or LoraWAN is to be used for data transmission. With LoRaWAN, the type of network join can also be defined (ABP vs. OTAA). Some devices even extend the possible values of the parameter, e.g. for an upload via LAN. In this case, details can be found in the device-specific documentation.
...