...
Since Lobaro devices include a variety of different technologies for sending data, the "WAN" parameter is one of the most important to control the behaviour of the device. This parameter can be used to set whether NB-IoT, LTE-M or LoraWAN is to be used for data transmission. With LoRaWAN, the type of network join can also be defined (ABP vs. OTAA). Some devices even extend the possible values of the parameter, e.g. for an upload via LAN. In this case, details can be found in the device-specific documentation.
| Name | Description | Default Value | Value Description & Examples |
|---|---|---|---|
WAN | Technology used for connection and data uplinks to backend | lte |
|
Older Firmware versions
With some older firmware versions, only "lte" or "lorawan" could be configured via the above-mentioned WAN parameter! In these older versions, additional parameters were used to configure the unit behaviour more precisely.
...