Navigate to: Integrations -> MQTT

Forward data from the Lobaro Platform via MQTT Publish to any MQTT broker.

Broker URL: must be in one of the following formats:

  • mqtt[s]://host.domain[:port]
  • tcp[s]://host.domain[:port]
  • ssl://host.domain[:port]

Default port for mqtt/tcp is 1883. Default port for mqtts/tcps/ssl is 8883.

ClientId: Used on MQTT connect. Default is: lobaro-{RND}. {RND} will be replaced by a unique random string.

Username / Password: Used to authenticate with the MQTT broker.

Topic: The MQTT topic to publish sensor data. (Can use Variable Substitution, for details see below.)

Currently we only support username/password authentication for MQTT yet.

Example adding MQTT Integration:

Variable Substitution

Some fields offer Variable Substitution that will be substituted with content from the forwarded payload or device metadata on execution of the integration.

Variable substitution is supported at:

  • HTTP Integration Target URL
  • MQTT Integration Topic name

Variables are enclosed by curly braces:

  • e.g. lobaro/v1/customer/{device.addr}/up -> lobaro/v1/customer/70b3d5e050010abc/up
    • where {device.addr} is 70b3d5e050010abc

The following substitution variables are available:

  • Device
    • device.addr - Address of the device.
    • - Name of the Receiving device inside the platform.
    • device.serial - Serial Number of the Receiving Device.
    • - Internal id of device. (Should only be used for self integration on the platform.)
  • Organisation
  • Data
    • data.Path.In.Json - reference any field in the forwarded data


To access the wMbus LinkLayer Id of a telegram use {data.mbus.IdString}

You can find the data JSON in the Device Data Tab of the device when expanding the row below "Data (Json)"