Hardware Variations / Accessories

Beside our standard products we may offer you a custom product variant matching your specific application. Most of our products are compatible with the following variations, for details about a specific product and pricing please contact us at sales@lobaro.de

Housing Options

Compact Lobaro Box Housing

Spelsberg TG PC 1208-6-o


DIN-Rail Housing

All DIN-Rail housings that fit our hardware are possible. The DIN-Rail mount can also be used without any housing.

We offer to deliver our hardware in the following housings:

130x130 (RK 4/12-L)

110x110 (RK 4/07-L)

Power Supply Options

AA-Batteries (3Ah)

Only for LoRaWAN products

Only our LoRaWAN hardware supports two AA-Batteries inside the Lobaro Box Housing.

We recommend to use Energizer Ultimate Lithium for our products.

  • Size: AA-Cell
  • Voltage: 1.5V
  • Capacity: up to 3Ah
  • Operating temperature: -40°C...+60°C

ER34615 3.6V Battery (D-Cell, 19Ah)

  • Size: D-Cell (34mm x 61.5mm)
  • Connector: JST XH series
  • Voltage: 3.6V
  • Continuous Discharge Current: 200mA (max.)
  • Capacity: up to 19Ah
  • Operating temperature: -55°C...+60°C
  • Li-SOCl2 (not rechargeable)

A reasonable alarm value for "Low Voltage" is around 3.2V - some devices might work on lower voltages.

ER34615M 3.6V Battery (D-Cell, 19Ah)

Similar to ER34615 but supports higher peak currents and is used for NB-IoT devices.

230V External Supply (5VDC)

Can be used standalone on an existing DIN-Rail or inside the DIN-Rail Housing (see above)


By default all our products are shipped with an internal pcb-antenna. An external SMA antenna connector can be mounted on request to the housing.

External antennas can be connected with a standard SMA RF-connector: